The reason why the bottom line of the computerized quilting machine is not on

Computerized quilting machine is an efficient and precise sewing equipment, its use can greatly improve sewing efficiency and quality. However, in the process of using the computerized quilting machine, sometimes the problem that the bottom line is not on can be encountered, which brings great troubles to the sewing work. So, what is the reason for the bottom line?
quilting machine pictures

                                                  Computer quilting machine manufacturer
The reason why the bottom line does not go up may be a line problem. The circuit of the computerized quilting machine is very complicated. If there is a problem with the circuit, it will cause the bottom line to fail. At this time, we need to check whether the line is connected correctly and whether there is any looseness or damage. If you find that there is a problem with the line, you need to replace or repair it in time.

The reason why the bottom line is not on may be the needle eye problem. The needle eye of the computerized quilting machine is very small, if the needle eye is blocked or damaged, it will cause the bottom line to miss. At this time, we need to clean the needle eye or replace it with a new one. In addition, if the eye of the needle is too small, the bottom thread will not be on the bottom line. At this time, it is necessary to replace the eye of the needle with a suitable one.

Third, the reason why the bottom line is not on may be the problem of the thread wheel. The thread wheel is an important part of the computerized quilting machine. If the thread wheel is damaged or loose, the bottom line will not be on. At this time, we need to check whether the wire wheel is running normally and whether there is any looseness or damage. If there is a problem with the wire wheel, it needs to be replaced or repaired in time.

The reason why the bottom line does not go up may be that the thread is loose or tight. The thread looseness or thread tightness of the computerized quilting machine needs to be adjusted to an appropriate position. If the thread is loose or the thread tightness is not appropriate, the bottom thread will not be on. At this time, we need to adjust the looseness or tightness of the thread to make it reach a suitable state.

There may be various reasons for not reaching the bottom line. We need to check carefully to find out the problem and solve it in time. Only in this way can the normal operation of the computerized quilting machine be guaranteed, and the sewing efficiency and quality can be improved.

REHOW Textile Machinery Co., Ltd. is a professional company that produces and sells textile printing and dyeing machinery and garment machinery equipment. The quality of the garment machinery produced by the company has been well received by customers for a long time. In order to strengthen quality management, improve corporate image, and better meet customer needs, our company has increased management efforts, making our company have new breakthroughs in quality.

At present, with the service tenet of “do not try our best, but try our best”, we attach importance to product quality and service quality, and meet new challenges with a new attitude.

At the same time, I would like to thank all the new and old customers for their consistent concern and support to our company. REHOW Textile Machinery will extend its warm hands and sincerely welcome all new and old customers to come again.
We believe that “focusing on what users care about” is the eternal survival point of the enterprise, and customer satisfaction is the unremitting pursuit and struggle of “REHOW”. Solve problems and share a win-win situation.


Post time: Jun-21-2023