The large roll cloth winding machine will fail under certain circumstances. The following are several special situations summarized by REHOW editor:
1. Cloth roll sheathing to one side: The cloth roll sheathing to one side is because one side of the cloth surface is tight and the other side is loose, forming an arc shape. Don’t place the rewinding rack at an angle, that’s not treating the inside. Of course, there are also factors of low winding tension.
2. The cloth is on the side of the upper traction roller offset: if the cloth is always offset on the side of the upper traction roller, when the expander is installed, the top of the expander rod is offset to this side, and there is no centering. The solution is to adjust the expanding rod to the middle position.
3. The tube cloth swings left and right on the upper traction: the reason is that the bottom end of the expander rod is not fixed with the expander rod seat ring, and the upper end swings to drive the tube cloth to swing left and right on the upper traction. The treatment method is to fix the expanding rod and its seat ring firmly.
Causes and Solutions of Faults in Large Roll Cloth Winding Machines Outside the Machine
Large volume package outside the machine
4. Flat and uneven cloth surface: There are many reasons for the uneven cloth surface, one of which is that the expanding rod is not stretched tightly with the woven cloth. If the four spreader rods are always in contact with the woven fabric, and the surrounding cloth is stretched tightly, the weft threads of several shuttles will have a slight difference in tension, especially if the weft threads come out of the sleeve, it can also be adjusted through the expansion of the spreader rods. Sleeve; the tension of the warp is uneven, and when the expanding rod is swelled tighter, pull out the tight warp a little more from the ring gauge to adjust the balance of the warp. The four expander rods are always in contact with the cloth surface, which expands the cloth surface and makes the cloth surface smooth.
REHOW Textile Machinery
An enterprise specializing in textile machinery manufacturing, it is committed to providing high-quality mechanical equipment and technical solutions for the global textile industry. REHOW Textile Machinery Factory is committed to the production of weaving beams and warp beams, large packages outside the machine, hydraulic transport vehicles, hank machines, looms, loom machines, warping vehicles, cloth cutting machines, electric warping vehicles, warping Library, slitting and slitting machine, coiling machine, ultrasonic slitting machine, opening machine, cloth inspection machine and other textile machinery and equipment research and development, the company has CNC lathes, CNC bending machines, CNC milling machines, hobbing machines, wire cutting A large number of modern equipment, strong technical force, advanced processing technology, complete testing methods, strict management, reliable product quality, and good pre-sales and after-sales service
Finally, the editor of REHOW summarizes: it is also a reminder to the majority of users that the correct adjustment and use of the cloth winding machine cannot be ignored, and it involves many cloth quality problems.
Post time: Jun-07-2023
