The fabric rolling machine is used for various fabrics, non-woven fabrics, foam cotton, leather, paper, reflective materials, acetate cloth, reinforcing tape, conductive cloth and other materials, such as round packaging and repeated printing before cutting and tying strips of various fabrics. Roll, can be rolled into straight or 45-degree twill fabric, photoelectric side-to-side, can effectively align thick and thin materials with automatic code control, and can set the length of the roll.
The fabric winding machine adopts an electronic edge alignment device, so that after the cloth and other materials are wound, the cloth edges are neat and consistent, and soft rolls or hard rolls can be selected according to the type of cloth. It is equipped with a stopwatch automatic control device, which can accurately measure the length of the cloth. And automatic control, the cloth rolling speed can be adjusted steplessly, the production efficiency is high, manpower is saved, and the single-person operation is convenient. The twill rolling cloth can be adjusted between 20 degrees and 70 degrees. The fabric rolling machine adopts a stainless steel cloth bucket, which will never rust and prevent the cloth from being stained. The machine and the automatic cutting and binding machine are a set of equipment. The fabric winding machine should be operated by designated personnel, and non-operating personnel are not allowed to use it without permission. Before operation, first turn on the power switch, let the fabric winding machine rotate one or two times, and check whether the machine is normal.
Metal objects and other sundries are not allowed to be placed on and around the fabric rolling machine, so as not to affect the cloth rolling effect. Operators should do a good job in daily maintenance and sanitation, and neutral detergent should be used when cleaning the conveyor belt. If any abnormalities are found during the operation of the cloth winding machine, the machine should be shut down immediately and the maintenance personnel should be notified to check. After get off work, cut off the power and do a good job of cleaning up.
Post time: Dec-22-2022