The cloth inspection machine can replace manual labor, automatically inspect and grade the cloth, cut it, and label the defects. The cloth inspection machine relies on the reflection of the light source and the light guide function to inspect the cloth.
The normal cloth inspection speed can reach 120 m/min. If it works by the terminal control system, the detected defects can be displayed on the screen. The report, the speed Quick and easy, it can adapt to high-frequency defects or new defects that rarely occur, and has a memory function, which can calculate and process more defects. The fabric inspection machine can be used to classify fabrics and perform statistical memory storage of the defects of the inspected fabrics. The cloth inspection machine makes the inspection of fabrics move towards automation. It is believed that after a certain period of continuous research, the cloth inspection technology will go far. It is one of the important links to form automation in textile enterprises.
Cloth inspection machine safety operating procedures
1. The cloth inspection machine is driven by a chain and operates with multiple rollers. The safety shield of the chain transmission part should be complete, firm and reliable. The electrical parts of the cloth inspection machine should have a protective box. The control box of the cloth inspection machine should be well grounded. Good working lighting, the code table of the cloth inspection machine is flat and intact, and the cloth feeding roller should be stable and firm.
2. Before starting the machine, carefully check whether there are sundries around the cloth inspection machine, whether there are sharp objects on the cloth inspection machine, so as not to hinder the work and damage the machine, and handle the cloth roll with care.
3. After turning on the machine, run it idling for a few weeks, check whether there is any abnormal sound, and imagine that there is no jamming before driving.
4. During the operation of the cloth inspection machine, it is strictly forbidden to change the cloth roll or fiddle with the cloth roll with a stick to prevent being involved in the machine and damaging the parts. The cloth roll should be replaced after the machine stops.
5. Frequently check the heating of the machine bearings and replace them if necessary. Oil the bearings once a week and do daily maintenance. Clean the drive chain at least once a month and clean the transmission chain once a quarter.
6. If any abnormal situation is found during operation, shut down the car immediately and let the maintenance personnel check and repair it before driving again.
Post time: Jan-12-2023
