Ribbon machine safety operating procedures

Ribbon machine safety operating procedures
1. Place the loom in a well-ventilated place with no flammable materials around, clean ground, no dust, and a relatively dry place.
2. It is strictly forbidden to expose the loom to rain, snow and water vapor.
3. The distance between the loom and the operating construction point should be kept at least 2 meters.
4. Do not cover anything on the ribbon loom, and keep good ventilation and heat dissipation.
5. Prepare insulating gloves and insulating electrical rubber boots for construction.
6. Make a special ground wire to make it well grounded, and completely connect the ground wire post on the back panel of the loom to the ground wire.
7. Put the fluff into the flocking nozzle and fasten the screen cover.
8. Insert the power plug into the AC 220V frequency 50Hz power socket, and insert the foot switch plug into the foot switch socket, the connection should be firm. (Note: This machine cannot use 380-volt two-phase AC power).
9. Turn on the main power switch, and observe whether the power indicator light is on. If everything is normal, proceed to the next step.
10. Step on the foot switch, if you can hear the sizzling sound of high-voltage discharge, it means that the machine is normal. Wear insulating gloves and insulating rubber boots to start flocking work.
11. After stopping the flocking, first release the foot switch, then turn off the power switch, and then cut off the power.
12. When flocking, adjusting the voltage can change the level of high voltage output, and the voltage should be adjusted according to the actual needs during work.

Ribbon loom

Ribbon loom

REHOW provides textile industrial machines to the whole world, helping them improve efficiency and reduce labor cost. REHOW provides various types of textile machinery: digital printing machine, raising machine, cloth inspection machine, packaging machine, half folding machine, half folding machine, rolling machine, slitting machine, cross cutting machine, ribbon machine, loom wait. If you are interested in us, please contact us now!


Post time: May-23-2023