ReHow Slitting Machine Principle

Brief introduction of RH-400 slitting machine:
Slitting machine is a kind of mechanical equipment that cuts wide-width fabric or film into multiple narrow-width materials. It is often used in textile and garment industry and printing and packaging industry.
In the past, the speed of the magnetic powder clutch of the slitter cannot be high, because it is easy to cause high-speed friction of the magnetic powder during operation, generate high temperature, shorten its life, and in serious cases, it will be stuck, hindering the operation of the machine, and bringing serious consequences to production. Seriously affected the production efficiency.
The traditional control scheme of the slitting machine is to use a large motor to drive the rewinding and unwinding shaft, and a magnetic powder clutch is added to the rewinding and unwinding reel, and the resistance generated by the magnetic powder clutch is controlled by adjusting the current of the magnetic powder clutch to control the surface tension of the material. . Magnetic powder clutch and brake is a special automatic actuator, which transmits torque through the magnetic powder filled in the working gap, changing the magnetic current can change the magnetic state of the magnetic powder, and then adjust the transmitted torque. It can be used for stepless speed regulation from zero to synchronous speed, suitable for high-speed fine-tuning and small and medium power speed regulation systems. It is also used to adjust the torque by adjusting the current to ensure that the tension remains constant during the winding process. Unwinding or rewinding tension control system.
Slitting machine features:
  REHOW RH-400 Slitting Machine is suitable for slitting wide width fabrics. It has the functions of automatic meter counting, counting, length setting, quantity automatic stop, and unwinding controlled by photoelectric automatic deviation correction. The whole machine has the characteristics of compact structure, fast speed, high efficiency, accurate cutting, simple operation and stable operation.
Care and Maintenance of ReHow Slitter:
Before use, the main components of the automatic slitting machine should be inspected and filled with lubricating oil; when inspecting and disassembling the automatic slitting machine, it is strictly forbidden to use inappropriate tools and unscientific operating methods; check the machine every two weeks Make a comprehensive cleaning and inspection; if the automatic slitting machine is not used for a long time, all bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine. If the automatic slitting machine has been out of service for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, wipe the exposed friction surface clean, and add lubricating oil. The daily maintenance and maintenance of the slitting machine should do the following four points.
First, the electrical parts should be cleaned and inspected regularly to eliminate hidden dangers in time.
Second, the daily maintenance of the slitting machine must be in place. The principle is to ensure that the sliding parts of the equipment are in good condition, smooth, clean, and cleared (no dust, no sundries).
The third is maintenance work, regular and irregular inspections of rotating parts (especially real-time monitoring of wearing parts). Implement regular adjustments, regular replacements, and make detailed records of the commutator to achieve the purpose of prolonging the service life of the equipment.
Fourth, improve the technical quality and level of the personnel who operate the slitting machine. The operation of the control part must be assigned to a person, and no one is allowed to operate without permission.
The following are the technical parameters of several types of slitting machines: photos and product technical parameters are provided by REHOW Machinery Co., Ltd.

RH-400A Slitting Machine With Hot Cutter

This machine is widely used in the production area of lace, garment processing, embroidery, banners production, packaging, gift processing, footwear processing, packaging etc.   

Technical Feature:

1. The dimension of stripes can be adjustable convenient and efficient. You can choose any width of each section on the basis of minimum width. 2. The vertical structure of slitting cutter is humanistic. It can make the influence on heating caused by slitting process reduce to a minimum    3. Equipped with an electronic controller, this device can control the cutter heating , and also heighten an effect of energy saving

4. The machine adopts infrared rays guiding system to make the fabrics slitting neatly and trimly and decrease scrap to a great extent  

5. The cutter of this machine is made of tungsten steel alloy, with which after special processing. The machine can be using much longer time by these cutters. At the same time of slitting, temperature can steal the fabric edges, so that no excess fabric irregular edges produced and no charred fabric leave

6. The newly designed feeding basket together with a transition device which could make slit conveniently both for rolled and flat form of fabrics

7. Compact mechanical design of the machine make greatly reduced footprint, thus saving space

Technical Parameters:

RH-400C Automatic Ultrasonic Cross Slitting Machine

This machine adopt high quality ultrasonic system, slitting and rolling on the nonwoven, soft edge-cutting, edge firm,  don’t fade, no cloth drop, save the raw waste approx. 40%. Compare to the traditional craft, this machine with high efficiency, fast speed, and easy operation, replace the mold at any time. Meanwhile, this machine can do straight cutting, embossing cutting and flat cutting for more options. Size of the machine is also adjustable.

Technical Features:

1, Instead of traditional cutting craft and make the automation come true. The process of slitting and cutting work at the same time, this improve the productivity and supplement the domestic vacancy

2, Feeding automatic: not the barrel, the entire material was added to, the use of magnetic tension control, correcting system automatically adjusts to ensure smooth feeding, cutting edge does not change color, cross-section not Alice, slitting width can be adjusted reasonable length

3, Ultrasonic slitting and crosscutting machine adopt the advanced ultrasonic transducer from Germany, strong effort.

4, The plastic roller is made of imported rubber, the surface with a precision cylindrical grinding machine, no deformation when feeding the material.

5, Ultrasonic crosscutting system adopt the original SMC Pneumatic components, long life, high precision

6, This machine adopt the servo from Japan, fast speed, work well

7, High precision of cutting length, automatic feeding, computer counting, speed, length slitting width can be adjusted

8, This machine adopt Taiwan import magnetic particle clutch device to make the tension constant

9, Slide adopt import Taiwan brand, no deformation, life long

10, According to user’s needs of tablecloth width, this machine can produce more than one table at the same time

Technical Parameters: