(1) Arrange the position of each warp beam and each color yarn bobbin on the warping frame according to the color warp arrangement sequence on the yarn-dyed beam, so that after the warp beams are combined on the sizing machine, the color yarn arrangement order basically conforms to the color on the dyed fabric. sorted order. In order to reduce the number of tube changes and facilitate subsequent operations, the same color warp should be consecutively numbered when the warp beams are numbered. For example, there are 16 red yarns in a certain position of the dyed fabric. The full cylinder yarn needs 12 warp beams. At this time, two red yarn beams can be placed in the corresponding position of the warping frame. Complete, or the 5th to 12th warp beams are complete, and there can be no gaps in the serial number in the middle. When merging warp beams on the sizing machine, the warp yarns should also be arranged according to the serial number of the warp beams from the upper layer to the lower layer, and care should be taken to make the unwinding direction of each warp beam consistent.
(2) The warping can also be arranged according to the color of the warp yarn. One warp beam or several warp beams of the same color yarn can be arranged in a row, and then arranged at the telescopic box in front of the sizing machine according to the color warp arrangement on the colored fabric. yarn. If the root number of a certain color meridian is too few or the number of color meridians is large but it is inconvenient to arrange, two kinds of color meridians can also be placed on the same warp shaft for warping. Also can secondary yarn arrangement on the sizing machine to the 1 above.
(3) If the colors of certain two color warps are close to each other, the twisted wires should be separated during warping and sizing, and the twisted wires should be replaced with grain rods (positioned between the back rest and the warp stoppers) after the loom is loaded on the loom, so that the value Lathe operation
Jiangsu Suzhou Rehow Machinery Co., Ltd. specializes in the production of textile machinery and equipment, which integrates research, design, production, marketing and service. It has a strong technical force, and constantly introduces domestic and foreign technologies. The product quality is reliable and the system is stable. The company has a large number of modern equipment such as CNC lathes, CNC bending machines, CNC milling machines, gear hobbing machines, wire cutting, etc., with strong technical force, advanced processing technology, complete testing methods, strict management, reliable product quality, and good pre-sales and after-sales service , is committed to providing high-quality mechanical equipment and technical solutions for the global textile industry.
Post time: May-26-2023