Introduction of Fabric Inspection Machine

The fabric inspection and rolling machine is used for all kinds of fabrics, non-woven fabrics, foam,  reflective materials, acetate fabrics, reinforcing tapes, conductive fabrics and other materials before packaging and various fabrics before cutting and baling. Repeated rolling, it can be rolled into straight or 45-degree twill fabric, photoelectric edge-to-edge, can effectively align and automatically control the code for thick and thin materials, and can set the length of the roll. At the same time, the fabric can be inspected and measured while the cloth is being rolled, which is very convenient and efficient. The fabric inspection and rolling machine adopts an electronic edge-aligning device, so that after the cloth and other materials are rolled, the edges of the cloth are neat and consistent, and the soft roll or hard roll can be selected according to the type of cloth. It is long, and automatically controlled, and the rolling speed can be adjusted steplessly. It has high production efficiency, saves manpower, and is easy to operate by one person. The cloth rolling machine should be operated by designated personnel, and non-operators are not allowed to use it without permission. Before operation, turn on the power switch and let the cloth rolling machine rotate one or two circles to check whether the machine is normal. Metal objects and other sundries are not allowed to be placed on and around the cloth rolling machine to prevent the effect of rolling cloth. Operators should do daily maintenance and hygiene, and use neutral detergents when cleaning the conveyor belt. If any abnormality is found during operation, the vehicle should be shut down immediately and the maintenance personnel should be notified for inspection. After get off work, cut off the power and do a good job of cleaning up.

fabric inspecition and rolling machine


Post time: Jul-07-2022