How to use the ultrasonic composite machine reasonably

How to use the ultrasonic compound machine reasonably? Today, REHOW Machinery Xiaobian will introduce how to use the ultrasonic compound machine in detail.

微信图片_20230517110401

1:Ultrasonic Composite Machine

1. Automatic control of cotton feeding
The principle of automatic control of cotton feeding is: timely feed back the ginning current to the microcomputer through the density of the seed cotton roll, and after a series of data processing, send the voltage signal to the frequency converter, and control the rotation speed of the flower feeding motor through frequency conversion speed regulation. Feed the amount of flowers. The density of the seed cotton lap is high, and the pressure on the sawtooth is also large. At the same time, the fiber content in the seed cotton lap increases, thus increasing the hooking force of the sawtooth on the seed cotton lap, so that the movement of the seed cotton lap is accelerated, which is beneficial to increase the output. However, when the density of the lap is too high, its movement resistance will be greatly increased, and as a result, the operation of the lap will be hindered, which is not conducive to increasing the output.

2. The protruding amount of the saw blade in the working box
The extension of the saw blade refers to the extension length of the saw blade measured perpendicular to the arc surface of the rib from the working point of the embossed rib along the arc surface of the rib 100mm down. During the ginning process of the embossing machine, the amount of extension of the saw blade directly affects the output of ginning. Generally speaking, if the extension of the saw blade is increased, the number of effective working teeth of the saw blade in the working box will increase, and the ability of the saw blade to pull fibers will be enhanced, which will help increase production.
3. Prevent severe friction
During the processing of seed cotton, due to the friction between the movement of seed cotton and lint and the processing equipment, cords and neps are often formed. The part that is prone to wire yarn and neps is the working box of the sawtooth gin. Therefore, we should check frequently to ensure the smoothness of saw blades (including sawtooth), ribs and coil boxes.

The above is how the editor shared today how to use the ultrasonic compound machine reasonably. I hope it will be helpful to everyone. For more information about the ultrasonic compound machine, you can continue to pay attention to this site! www.szrehow.com

微信图片_20230517110425

Ultrasonic Slitter

 

REHOW has an efficient and professional service team, committed to providing customers with high-quality consultation and after-sales service. REHOW has always been adhering to the business philosophy of “integrity, quality, innovation, and win-win” to create a better future hand in hand with customers.


Post time: May-17-2023