The electric heating steam generator is a fully automatic boiler that continuously generates steam, and illegal operation is extremely harmful. The specific operation precautions are as follows:
1. During the operation, first turn on the power, turn on the switch, turn on the water pump and start working, there will be a buzzing sound for adding water, the indicator light for adding water will be on, and the indicator light for heating will be on when the water level is reached.
2. When the heating reaches the working pressure (not lower than 0.3 and not higher than 0.4), slowly open the steam release valve switch, and the required steam will be discharged.
3. When removing accumulated water through the exhaust valve of the full steam iron during use, you need to turn the handle slowly. It is forbidden to open the handle quickly to drain water quickly, so as not to cause burns or other dangers. It is strictly forbidden to spray steam directly on the human body.
4. It is strictly forbidden to move all kinds of equipment during work, and it is forbidden to stand near the steam generator or behind the equipment, and it is not allowed to touch the generator and the metal body of the iron with hands to prevent burns.
5. During use, only one person is allowed to use it, and unrelated personnel are not allowed to watch or operate at the same time without the permission of the equipment operator.
6. The water pump must not work without water. Always monitor the water level and add water in time. During the process of adding water, it is strictly forbidden to sprinkle water outside the casing to ensure safe production. If conditions permit, it should be filled with distilled water or pure water. When filling tap water, it should be filled at the same time softener.
7. Do not forcefully pull the steam pipe into bends during use. If the steam pipe leaks or other abnormalities occur, report it immediately and stop using it.
8. Close the switch after use, cut off the power supply, and drain the remaining water in the pressure vessel after the pressure drops to 0 pressure.
REHOW Textile Machinery Co., Ltd. is a professional company that produces and sells garment machinery equipment. The quality of the garment machinery produced by the company has been well received by customers for a long time. In order to strengthen quality management, improve corporate image, and better meet customer needs, our company has increased management efforts, making our company have new breakthroughs in quality.
At present, with the service tenet of “do not try our best, but try our best”, we attach importance to product quality and service quality, and meet new challenges with a new attitude.
At the same time, I would like to thank all the new and old customers for their consistent concern and support to our company. REHOW Textile Machinery will extend its warm hands and sincerely welcome all new and old customers to come again.
Post time: Jun-03-2023