How should the cutting and binding machine be fed for different materials? In recent years, many customers have purchased strip cutting and binding machines from REHOW Machinery for external processing, but because many customers are not familiar with this line of work before, there will always be many after-sales problems, and the most common one is the burning knife problem of strip cutting machines. The fabric is cut bad, and the waste of fabric is also a loss, which slows down the efficiency.
The first point: Pay attention to the knife speed of the strip cutting machine for materials of different thicknesses. If the material is relatively thin, the speed of the knife should be slowed down, because the heat generated by too fast a knife speed will melt those relatively thin materials, and they will start to stick after melting. The knife will even stop working. If you want to speed up the efficiency and avoid burning the knife, you can only add water by dripping. If adding water by dripping still doesn’t work, you’d better reduce the speed of the knife.
The second point: Pay attention to the knife speed for materials of different materials. If it is a viscous material, in addition to slowing down the knife speed, it is best to add white starch oil to prevent burning of the knife. The efficiency is enhanced to a certain extent. In addition, the knife speed frequency for cutting common materials is 50 Hz, and the rotational speed of the spindle is 30 Hz. Based on this, the speed can be adjusted appropriately.
Jiangsu Suzhou Rehow Textile Machinery Co., Ltd. specializes in the production of textile machinery and equipment, which integrates research, design, production, marketing and service. It has a strong technical force, and constantly introduces domestic and foreign technologies, with reliable product quality and stable system. The company uses imported raw materials and component supporting products. The product range of REHOW textile machinery covers almost all types of fabrics, including but not limited to cutting and binding machines, hank machines, looms, looms, warping cars, cloth cutting machines, Electric warping car, warping warehouse, slitting and slitting machine, coiling machine, ultrasonic slitting machine, opening width machine, cloth inspection machine.
REHOW Textile Machinery continues to lead the textile industry with its innovative approach and rich experience. We welcome offers and partnership opportunities with open arms!
Note: When operating the cutting and binding machine to cut, if there is a problem of uneven cutting and uneven knife surface, it is recommended to check whether the lock is locked. It is best to remove it and reinstall it. In addition, be careful not to touch it when sharpening the knife to the knife surface, otherwise errors are prone to occur.
Post time: Jun-06-2023