1, Some fabrics are not separated. ① Check whether the temperature and speed are properly coordinated, and whether the speed is too fast; check whether the cutter is heated, whether the heating tube is energized or broken and open circuit; ② observe the distance between the cutter and the drum, and check whether the cutter is in place.
2, There are hair bundles on the edge of the cloth strip, generally the temperature is too low, you can increase the temperature or reduce the speed appropriately.
3. There are black scorched grains on the edge of the cloth, which usually means that the temperature is too high, and the temperature can be lowered appropriately.
4. When the cloth ring on the receiving shaft is too loose or too tight, the tension can be adjusted through the automatic tension adjustment switch on the control panel. If there is no tension system, the brake spring screw on the left shaft head can be adjusted.
Post time: Dec-12-2022
