embroidery machine Safe Operating Procedures-REHOW

Warning: When operating the embroidery machine, in order to prevent personal injury accidents, the following principles

embroidery machine

                                                                             embroidery machine

must be observed:
(1) Before the operation of the machine:
1. This machine can be used for computerized embroidery processing on fiber finished products, semi-finished products and leather-like materials. In principle, it cannot be used for other processing purposes;
2. In order to prevent non-related operators from operating, use it in an environment where outsiders can be monitored, and pay special attention not to allow non-workshop workers to enter the vicinity of the machine;
3. The operation of the machine shall be performed by qualified personnel;
4. The back of the machine does not belong to the working area, please turn off the power switch when entering;
5. Do not step on the machine, and do not use the pull-rod switch as a handle;
6. Items cannot be placed on the machine table;
7. Do not use bent needles or needles that are not suitable for materials;
8. Please make sure to plug in the power socket. When the electrodes of the power socket come into contact with metal, it may cause fire and electric shock;
9. Do not damage, process or heat power cables and other wiring cables. Do not apply excess force to the power supply and distribution cables. The power supply and wiring cables are damaged, which may cause fire and electric shock;
10. In order to facilitate the operation of the machine, it is necessary to wear clothing and attire that are suitable for operation. And do not operate the machine with wet hands or water;
11. In principle, the machine is operated by one worker. When multiple personnel are working, they must confirm that there is no one working near the machine’s operating part before starting the machine;
12. Familiarize yourself with the operation instructions of this machine, and operate the machine only after you understand the operation content.
(2) When the machine is running:
1. Do not splash water and chemicals on the control device of the goods flowing into the power box. It may cause a short circuit in the internal circuit, resulting in fire and electric shock accidents;
2. If it happens, please contact the workshop maintenance personnel or contact the sales agency immediately after turning off the main power supply;
3. Do not put your hands or face near the operating parts of the machine while the machine is running. Especially in the vicinity of the needle bar, hook, and rotating wheel, it will be very dangerous;
4. The cover of the shaft and transmission shaft cannot be disassembled during the operation of the machine, and the machine cannot be turned on with the cover removed;
5. Please turn off the main power after the job is finished (turn off the power switch of the machine before turning off the main power).
(3) When adjusting the machine:
1. When opening the associated switch boxes in the store, the main power supply must be turned off first. And before turning off the main power, the power switch of the machine must be turned off first;
2. When threading and checking the status of computerized embroidery processing, the machine must be shut down;
3. When turning the main shaft of the computerized embroidery machine by hand, the power switch must be turned off first.
(4) Emergency stop switch:
Press and hold the emergency switch in an emergency state, that is, cut off the power of the machine to stop the machine
(5) Matters needing attention during cleaning and maintenance:
〔Dangerous〕: To prevent electric shock: when cleaning, maintaining and operating the machine, the main power supply must be turned off first. After 4 minutes after the main power is turned off, the voltage of the machine is removed.
1. Cleaning and maintenance operations should be performed by properly trained personnel.
2. With regard to the control of the spindle motor, the voltage of the machine will not be removed until 10 minutes after the main power is turned off.

REHOW Textile Machinery
An enterprise specializing in textile machinery manufacturing, it is committed to providing high-quality mechanical equipment and technical solutions for the global textile industry.
Mainly produce fabric slitting machines, high-speed looms, cloth inspection machines, cloth packaging machines, embroidery machines and other textile equipment. We have independent research and development capabilities and a complete quality management system. All products have undergone strict quality testing and certification to ensure product stability and reliability.


Post time: Jun-21-2023