Analysis on the possible abnormalities of the cutting machine blade

All kinds of problems will inevitably arise during the long-term operation of any equipment. If problems cannot be solved in time, productivity will be seriously affected, and failure to keep up with progress will inevitably cause losses.

The same is true for the strip cutting machine. It is very common for some situations to occur in long-term work. As a strip cutting machine manufacturer, Yuancheng Machinery is very familiar with various abnormal situations that may occur in the strip cutting machine. , Of course, we have also summarized a set of methods for how to deal with these abnormal situations. Today I will share some of how to solve these abnormal situations!

Situation 1: The exit wound of the slitting machine is wavy

The cause of this situation is related to the deviation correction device before the pole piece enters the laser cutting part. Of course, it is also related to the fact that the edge of the round cutter of the strip cutting machine is not neat enough during the strip cutting process. This situation will cause strip cutting The deviation correction device in the whole process is very strong, which will also cause the cutting speed of the cutter to be insufficient, and it may also be that the cut of the cutter is blunt or the cut is not meshed well enough;

Strip cutting machine

The second case: lotus leaf sleeves

The lotus leaf sleeves appearing in the laser cutting process of the cutting machine should be a situation that many students have probably encountered. The reason for this kind of situation must be related to the cutting knife. It may be caused by the soreness of the blade. Yes, that is, the hardness of the blade is not enough, you only need to remove the blade of the lower cutter and adjust to the appropriate supporting force;

The third case: there are cracks, ribbons, etc.

Of course, this kind of follow-up is the appearance of wavy lines on the edge. If there are wavy lines but no burrs, it must not be caused by blunt knives. The most likely reason for this is that the blades of the left and right knives are not Conform, that is, the problem of support;

Of course, there are definitely not only these types of abnormalities that occur during the working process of the slitting machine. What I mainly share with you today is the abnormality related to the slitting machine blade.

Other related abnormalities of the strip cutting machine will continue to be shared with you in future articles. Of course, if you encounter any problems, you can also contact us directly through the phone number on the page.
REHOW provides textile industrial machines to the whole world, helping them improve efficiency and reduce labor cost. ReHow provides various types of textile machinery: raising machine, cloth inspection machine, packing machine, coiling machine, slitting machine, cross cutting machine, ribbon weaving machine, weaving machine, etc. If you are interested in us, please contact us now!


Post time: Apr-25-2023