Cloth rolling machine is used for various fabrics, non-woven fabrics, foam, leather, paper, reflective materials, acetate cloth, reinforcing tape, conductive cloth and other materials, such as round packaging and repeated printing of various fabrics before cutting and bundling.
Roll, can be rolled into straight or 45-degree twill fabric, photoelectric side-to-side, can effectively align thick and thin materials with automatic code control, and can set the length of the roll. The cloth winding machine adopts an electronic edge-aligning device, so that after the cloth and other materials are wound up, the edges of the cloth are neat and consistent, and soft rolls or hard rolls can be selected according to the type of cloth. It is equipped with a stopwatch automatic control device, which can accurately measure the length of the cloth. And automatic control, the cloth rolling speed can be adjusted steplessly, the production efficiency is high, manpower is saved, and the single-person operation is convenient.
The twill rolling cloth can be adjusted between 20 degrees and 70 degrees. The stainless steel cloth bucket is used, which will never rust and prevent the cloth from being stained. The machine and the automatic cutting and binding machine are a set of equipment. The cloth winding machine should be operated by designated personnel, and non-operating personnel are not allowed to use it without permission. Before operation, first turn on the power switch, let the cloth winding machine rotate one or two times, and check whether the machine is normal. Metal objects and other sundries are not allowed to be placed on and around the cloth rolling machine, so as not to affect the cloth rolling effect.
Operators should do a good job in daily maintenance and sanitation, and neutral detergent should be used when cleaning the conveyor belt. If abnormalities are found during operation, shut down the car immediately and notify the maintenance personnel to check. After get off work, cut off the power and do a good job of cleaning up.
Post time: Dec-06-2022
